Install Drupal 8 in RHEL, CentOS & Fedora
Drupal is an open source, flexible, highly scalable and secure Content Management System (CMS)
which allows users to easily build and create web sites. It can be
extended using modules and enables users to transform content management
into powerful digital solutions.
Drupal runs on a web server like Apache, IIS, Lighttpd, Cherokee, Nginx and a backend databases MySQL, MongoDB, MariaDB, PostgreSQL, SQLite, MS SQL Server.
In this article, we will show how to perform a manual installation and configuration of Drupal 8 on RHEL 7/6, CentOS 7/6 and Fedora 20-25 distributions using LAMP setup.
1. First we will start with installing Apache web server from the official repositories:
To install MariaDB database, you need to add the following official MariaDB repository to file
16. Next, select an installation profile, choose Standard and click Save to Continue.
17. Look through the requirements review and enable clean URL before moving forward.
Now enable clean URL drupal under your Apache configuration.
18. Once you enabled clean URL for Drupal, refresh the page to perform database configurations from the interface below; enter the Drupal site database name, database user and the user’s password.
Once filled all database details, click on Save and Continue.
If the above settings were correct, the drupal site installation should start successfully as in the interface below.
19. Next configure the site by setting the values for (use values that apply to your scenario):
20. The interface that follows shows successful installation of Drupal 8 site with LAMP stack.
Now you can click on Add content to create a sample web content such as a page.
Optional: For those who are uncomfortable using MySQL command line to manage databases, install PhpMyAdmin to manage databases from a web browser interface.
Visit the Drupal Documentation: https://www.drupal.org/docs/8
That’s all! In this article, we showed how to download, install and setup LAMP stack and Drupal 8 with basic configurations on CentOS 7. Use the feedback form below to write back to us concerning this tutorial or perhaps to provide us any related information.
Drupal runs on a web server like Apache, IIS, Lighttpd, Cherokee, Nginx and a backend databases MySQL, MongoDB, MariaDB, PostgreSQL, SQLite, MS SQL Server.
In this article, we will show how to perform a manual installation and configuration of Drupal 8 on RHEL 7/6, CentOS 7/6 and Fedora 20-25 distributions using LAMP setup.
Drupal Requirement:
- Apache 2.x (Recommended)
- PHP 5.5.9 or higher (5.5 recommended)
- MySQL 5.5.3 or MariaDB 5.5.20 with PHP Data Objects (PDO)
Step 1: Installing Apache Web Server
# yum install httpd2. After the installation completes, the service will be disabled at first, so we need to start it manually for the mean time and enable it to start automatically from the next system boot as well:
------------- On SystemD - CentOS/RHEL 7 and Fedora 22+ ------------- # systemctl start httpd # systemctl enable httpd ------------- On SysVInit - CentOS/RHEL 6 and Fedora ------------- # service httpd start # chkconfig --level 35 httpd on3. Next, in order to allow access to Apache services from HTTP and HTTPS, we have to open 80 and 443 port where the HTTPD daemon is listening as follows:
------------- On FirewallD - CentOS/RHEL 7 and Fedora 22+ ------------- # firewall-cmd --permanent --zone=public --add-service=http # firewall-cmd --permanent --zone=public --add-service=https # firewall-cmd --reload ------------- On IPtables - CentOS/RHEL 6 and Fedora 22+ ------------- # iptables -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT # iptables -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT # service iptables save # service iptables restart4. Now verify that Apache is working fine, open a remote browser and type your server IP Address using HTTP protocol in the
URL:http://server_IP
, and the default Apache2 page should appear as in the screenshot below.Step 2: Install PHP Support for Apache
5. Next, install PHP and the required PHP modules.# yum install php php-mbstring php-gd php-xml php-pear php-fpm php-mysql php-pdo php-opcacheImportant: If you want to install PHP 7.0, you need to add the following repositories: EPEL and Webtactic in order to install PHP 7.0 using yum:
------------- Install PHP 7 in CentOS/RHEL and Fedora ------------- # rpm -Uvh https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm # rpm -Uvh https://mirror.webtatic.com/yum/el7/webtatic-release.rpm # yum install php70w php70w-opcache php70w-mbstring php70w-gd php70w-xml php70w-pear php70w-fpm php70w-mysql php70w-pdo6. Next, to get a full information about the PHP installation and all its current configurations from a web browser, let’s create a
info.php
file in the Apache DocumentRoot (/var/www/html
) using the following command.# echo "<?php phpinfo(); ?>" > /var/www/html/info.phpthen restart HTTPD service and enter the URL
http://server_IP/info.php
in the web browser.# systemctl restart httpd OR # service httpd restart
Step 3: Install and Configure MariaDB Database
7. For your information, Red Hat Enterprise Linux/CentOS 7.0 moved from supporting MySQL to MariaDB as the default database management system.To install MariaDB database, you need to add the following official MariaDB repository to file
/etc/yum.repos.d/MariaDB.repo
as shown.[mariadb] name = MariaDB baseurl = http://yum.mariadb.org/10.1/centos7-amd64 gpgkey=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB gpgcheck=1Once the repo file in place you can able to install MariaDB like so:
# yum install mariadb-server mariadb8. When the installation of MariaDB packages completes, start the database daemon for the mean time and enable it to start automatically at the next boot.
------------- On SystemD - CentOS/RHEL 7 and Fedora 22+ ------------- # systemctl start mariadb # systemctl enable mariadb ------------- On SysVInit - CentOS/RHEL 6 and Fedora ------------- # service mysqld start # chkconfig --level 35 mysqld on9. Then run the
mysql_secure_installation
script to secure the database (set root password, disable remote root
login, remove test database and remove anonymous users) as follows:# mysql_secure_installation
Step 4: Install and Configure Drupal 8 in CentOS
10. Here, we will start by downloading the latest Drupal version (i.e 8.2.6) using the wget command. If you don’t have wget and gzip packages installed, then use the following command to install them:# yum install wget gzip # wget -c https://ftp.drupal.org/files/projects/drupal-8.2.6.tar.gz11. Afterwards, let’s extract the tar file and move the Drupal folder into the Apache Document Root (
/var/www/html
).# tar -zxvf drupal-8.2.6.tar.gz # mv drupal-8.2.6 /var/www/html/drupal12. Then, create the settings file
settings.php
, from the sample settings file default.settings.php
) in the folder (/var/www/html/drupal/sites/default) and then set the appropriate permissions on the Drupal site directory, including sub-directories and files as follows:# cd /var/www/html/drupal/sites/default/ # cp default.settings.php settings.php # chown -R apache:apache /var/www/html/drupal/13. Importantly, set the SELinux rule on the folder “/var/www/html/drupal/sites/” as below:
# chcon -R -t httpd_sys_content_rw_t /var/www/html/drupal/sites/14. Now we have to create a database and a user for the Drupal site to manage.
# mysql -u root -p Enter password:
MySQL Shell
Welcome to the MariaDB monitor. Commands end with ; or \g. Your MySQL connection id is 12 Server version: 5.1.73 Source distribution Copyright (c) 2000, 2016, Oracle, MariaDB Corporation Ab and others. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. MySQL [(none)]> create database drupal; Query OK, 1 row affected (0.00 sec) MySQL [(none)]> create user ravi@localhost identified by 'tecmint123'; Query OK, 0 rows affected (0.00 sec) MySQL [(none)]> grant all on drupal.* to ravi@localhost; Query OK, 0 rows affected (0.00 sec) MySQL [(none)]> flush privileges; Query OK, 0 rows affected (0.00 sec) MySQL [(none)]> exit Bye15. Now finally, at this point, open the URL:
http://server_IP/drupal/
to start the web installer, and choose your preferred installation language and Click Save to Continue.16. Next, select an installation profile, choose Standard and click Save to Continue.
17. Look through the requirements review and enable clean URL before moving forward.
Now enable clean URL drupal under your Apache configuration.
# vi /etc/httpd/conf/httpd.confMake sure to set AllowOverride All to the default DocumentRoot /var/www/html directory as shown in the screenshot below.
18. Once you enabled clean URL for Drupal, refresh the page to perform database configurations from the interface below; enter the Drupal site database name, database user and the user’s password.
Once filled all database details, click on Save and Continue.
If the above settings were correct, the drupal site installation should start successfully as in the interface below.
19. Next configure the site by setting the values for (use values that apply to your scenario):
- Site Name – TecMint Drupal Site
- Site email address – admin@tecmint.com
- Username – admin
- Password – ##########
- User’s Email address – admin@tecmint.com
- Default country – India
- Default time zone – UTC
20. The interface that follows shows successful installation of Drupal 8 site with LAMP stack.
Now you can click on Add content to create a sample web content such as a page.
Optional: For those who are uncomfortable using MySQL command line to manage databases, install PhpMyAdmin to manage databases from a web browser interface.
Visit the Drupal Documentation: https://www.drupal.org/docs/8
That’s all! In this article, we showed how to download, install and setup LAMP stack and Drupal 8 with basic configurations on CentOS 7. Use the feedback form below to write back to us concerning this tutorial or perhaps to provide us any related information.
Comments
Post a Comment